Dashboard 4.2 Series 1 2+2 (1966-1967)
dashboard cover - forward section on windscreen frame
Required: 1
to cover the area between dashboard and windscreen frame
Required: 1
this black plasic cover is moulded perfectly to match clean at your existing dashboard
Required: 1
for centre demister nozzle in dashboard
Required: 1
for side demister nozzle in dashboard
Required: 2
for outer demister nozzle in dashboard
Required: 2
dashboard, centre section, RH
Required: 1
dashboard, centre section, LH
Required: 1
dashboard, outer section, RH
Required: 1
dashboard, outer section, LH
Required: 1
Required: 1
covered with black vinyl
Required: 1
RH, RHD models
Required: 1
LH, RHD models
Required: 1
retaining instrument panel plate
Required: 2
retaining instrument panel plate
Required: 2
grab handle at side of dashboard - stainless steel reproduction
Required: 2
No.10 with 5/8" length - galvanised screw with Phillips PZ2 cross slotted panhead
Required: 2
retaining bracket to dashboard
Required: 2
retaining bracket to dashboard
Required: 10
retaining bracket to dashboard
Required: 1
grab handle to bracket - chromed and polished
Required: 2
retaining dashboard - lower position
Required: 2
retainng dashboard - upper position
Required: 2
dashboard, RH side - chromed
Required: 1
dashboard, LH side - chromed
Required: 1
retaining cover panel wiring harness
Required: 2
under dashboard - 3-piece black millboard set for RHD models without air conditioning
Required: 1
under dashboard - 3-piece black millboard set for LHD models without air conditioning
Required: 1
retaining under dash cover
Required: 2
retaining under dash cover
Required: 3
radio console, front
Models with manual transmission
Required: 1
radio console, front
Models with automatic transmission
Required: 1
under dashboard, RH
LHD models with air condition
Required: 1
under dashboard, LH
LHD models with air condition
Required: 1
tray liner, RH
Required: 1
tray liner, LH
Required: 1
frame
Models with manual transmission
Required: 1
frame
Models with automatic transmission
Required: 1
for radio console speakers - set of 2
Must be adapted for automatic models
Required: 1
securing loudspeaker grill
Required: 8
retaining blanging plate to radio console
Required: 2
retaining blanging plate to radio console
Required: 2
retaining blanging plate to radio console
Required: 4
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
ash tray blanking plate
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
ash tray
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
ash tray - complete with mounting kit
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
chromed - required when radio is not fitted
Required: 1
on radio blanking plate - untrimmed
Required: 1
gearbox tunnel - fibreglass replacement
Jaguar: E-Type 4.2 Series 1 OTS from 1E20103 (RH) and 1E10360 (LHD) plus FHC from 1E20103 (RHD) and 1E30350 (LHD) plus 2+2 with manual transmission from 1E50001 (RHD) and 1E75001 (LHD), all 4.2 Series 2 with manual transmission (1964-1970)
Required: 1
rubber type
Models without gear lever grommet
Required: 1
rubber type
Models with gear lever grommet
Required: 1
mild steel
Models with manual transmission
Required: 1
mild steel
Models with automatic transmission
Required: 1
remode control
Models with manual transmission
Required: 1
made of black imitation leather
Required: 1
made of beige imitation leather
Required: 1
made of mulberry imitation leather
Required: 1
made of navy imitation leather
Required: 1
made of dark green imitation leather
Required: 1
without arm rest
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
centre arm rest
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 1
retaining hinge
4.2 Series 1 OTS from 1E1001 to 1E1863 (RHD) and from 1E10001 to 1E15888 (LHD), FHC from 1E20001 to 1E21583 (RHD) and from 1E30001 to 1E34249 (LHD) (1964-67)
Required: 6
retaining radio blanking plate
Required: 2
retaining radio blanking plate
Required: 2
for demister nozzles in dashboard - five piece kit in black
Required: 1
