Cylinderhead - 2.5 NA Diesel
new head with valves and valve springs
Required: 1
engine breather
To engine number 12J42593C
Required: 1
engine breather
From engine number 12J42593C
Required: 1
with engine breather connection
To engine number 12J42593C
Required: 1
with connection for engine breather hose
From engine number 12J42594C
Required: 1
engine breather system
To engine number 12J42593C
Required: 1
engine breather system
From engine number 12J42594C
Required: 1
made from cork, adhesive
Required: 1
inlet valve
To engine number 17H26286A
Required: 4
inlet valve
To engine number 17H26286A
Required: 4
with 6.9 cm total length
Required: 2
with 11.6 cm total length
Required: 9
with 15.2 cm total length
Required: 5
water temperature - on inlet manifold, water pump housing, thermostat housing or water rail
Vehicles to April 1989
Required: 1
water temperature
Vehicles from April 1989 up to VIN...WA159806
Required: 1
water temperature
Vehicles from VIN...WA159807
Required: 1
temperature transmitter - feature: M24x1.0 external thread
Required: 1
temperature sensor adaptor to cylinder head
Required: 1
engine block
Vehicles up to April 1989
Required: 1
cylinder block
Vehicles from April 1989
Required: 1
cylinder block
Vehicles up to April 1989
Required: 1
cylinder block
Vehicles from April 1989
Required: 2
cylinder head
To engine number 17H26286A
Required: 1
cylinder head
From engine number 17H26287A
Required: 2
oil pipe to cylinder haead and to engine block- feature: M10x1.5 standard thread
Required: 2
between cylinder head and cylinder block
Required: 1
cylinder head - total length: 3.3/16"
Required: 4
cylinder head - total length: 3.3/16"
Required: 2
inlet valve
To engine number 17H26286A
Required: 4
inlet valve
From engine number 17H26287A
Required: 4
exhaust valve
To engine number 17H26286A
Required: 4
exhaust valve
From engine number 17H26287A
Required: 4
classic soft material gasket on metal layer
Required: 1
retaining the rocker shaft
Vehicles up to August 1986
Required: 1
inlet and exhaust valve - may replace the genuine fitted double spring
Required: 8
Can be fitted if suffering from excessive valve stem or valve rocker wear
Required: 8
cam follower
Vehicles up to August 1986
Required: 8
for cam follower
For vehicles from August 1986
Required: 8
complete unit with slide rail, roller, bolt and washer
Required: 8
