Differential and propshaft - Models with Rover "4 Pin" rear axle
rear axle with drum brake
With axlecode 22S 23S
Required: 1
rear axle with disc brakes
With axlecode 42S 44S
Required: 1
rear axle
90 models with axlecode 58S 59S
Required: 1
set planetary gears. Includes the 4 small, 2 big pinions and 4 end caps
Axlecode: 23S 44S
Required: 1
set planetary gears. Includes the 4 small, 2 big pinions and 4 end caps
Axlecode 44S HD
Required: 1
and crown wheel housing. Heavy duty 4-Pin version
Required: 1
crown wheel and pinion - lateral bearing
Required: 2
mounting differential housing
Required: 10
3.54:1 ratio - feature: securing with flange nut
From axle code 44S 00001 to 44S 00421A
Required: 1
securing with bolt/pin
From axle code 44S00442A - feature: securing with bolt/pin
Required: 1
pinion end - thickness: 0.038"
Required: 1
pinion end - thickness: 0.042"
Required: 1
pinion end - thickness: 0.044"
Required: 1
pinion end - thickness: 0.046"
Required: 1
pinion end - thickness: 0.048"
Required: 1
pinion end - thickness: 0.050"
Required: 1
pinion end - thickness: 0.052"
Required: 1
pinion end - thickness: 0.054"
Required: 1
pinion end - thickness: 0.056"
Required: 1
mounting tab differential locking ring
Required: 1
for differential with fill opening
Required: 1
mounting differential housing to axle
Required: 10
differential input shaft - feature: 24 internal splines
Required: 1
differential input shaft - feature: 4 internal splines
Required: 1
entrance propshaft
To axlecode 22S 08283B
Required: 1
entrance propshaft
From axlecode 22S 08284B
Required: 1
entrance propshaft
To axlecode 22S 08283B
Required: 1
entrance propshaft
From axlecode 22S 08284B
Required: 1
differential pinion, outer
Required: 1
flange end bearing - thickness: 0.060"
Required: 1
pinion, rear position - 0.062"
Required: 1
pinion, rear position - 0.064"
Required: 1
flange endend - thckness: 0.066"
Required: 1
pinion, rear position - 0.068"
Required: 1
pinion, rear position - 0.070"
Required: 1
pinion, rear position - 0.072"
Required: 1
pinion, rear position - 0.074"
Required: 1
pinion, rear position - 0.076"
Required: 1
pinion, rear position - 0.081"
Required: 1
greaseable type with 82 mm overall length
90, 110 and 130 models with drum brakes
Required: 1
greaseable type with 75 mm span width and 27 mm cup diameter
90, 110 and 130 models with disc brakes
Required: 1
at propshaft, front Position
Required: 1
rear axle
Defender 90: 4-cyliner Diesel and 4-cylinder Petrol
Required: 1
rear axle
Defender 90: 3.5 V8 to VIN...CA254406 (1983-85)
Required: 1
rear axle
Defender 90: 3.5 V8 from VIN...CA254407
Required: 1
rear axle
Defender 110: 4-cyliner Diesel and 4-cylinder Petrol
Required: 1
rear axle
Defender 110: 3.5 V8 to VIN...LA937639
Required: 1
rear axle
Defender 110: 3.5 V8 from VIN...LA937640
Required: 1
rear axle
Defender 130: 4-cylinder models
Required: 1
rear axle
Defender 130: 3.5 V8 to VIN...KA930455 (1983-93), 300Tdi from VIN...TA999464 to WA199999 (1996-2000) and Td5 from VIN...XA159807 to 2A637979 (1999-2002)
Required: 1
