Bougie kabel set
Rover: P5B (1967-73) ? P6 3500 (1968-76) ? SD1 3500 V8 (1976-87)
Morgan: Plus 8 (1968-2004)
Triumph: TR8 (1977-81)
other manufacturers: Marcos: Mantula (1983-93)? Ginetta G33 (1991-95) ? Sisu NA-140 BT (1986-91) ? Bowler Wildcat (2002-06) ? all other vehicles with Rover V8 engine
Range Rover: Classic V8 (1970-96) ? P38a V8 (1994-2002)
MG: MGB V8 ? RV8 (1995-95)
Land Rover: Series III V8 (1979-85) ? Defender V8 (1983-2000) ? Discovery I V8 (1989-98)
TVR: Vehicles with Rover V8 engine: 350i, 350SE, 350SX, 390SE, 400SX, 420SE, 420SEAC, 450SE, 450SEAC, Chimaera, V8S, Griffith (1983-2002)
for Lucas 35D8, 35DE8 and 35DM8 distributors
Almost all spark plug wire sets sold today are a radio noise suppression type that use a carbon core as the conductor instead of copper wire. The carbon core tends to crack and loose some of its conductivity over time from engine vibrations and each time you remove a spark plug or change a distributor cap. This gradually reduces the spark available at the plugs, which is seen as a gradual loss in power and fuel mileage.
For top engine performance and fuel economy we recommend that the plug wires be replaced every time the plugs are. Caps and rotors arms should be changed as a set. If you do not have electronic ignition installed, the contact set gap should be checked frequently (Limora recommends every 3.000 miles). Slipped contact sets are often mistaken for carburettion problems. Before the carburettor, check the gap.
Accessory Bougie kabel set
