Ebersp?cher Pre-heater
Hydronic 1 B5WSC - 12 Volt, 5 kW (engines over approx. 2.0 litres capacity)
Fuel: Petrol
Voltage: 12 Volt
Heating medium: water
Control/heating levels: small/large
Control/power = 1500 Watt/5000 Watt
Fuel consumption litres/hour: 0.2/0.69
Power consumption in operation: 22 Watt/50 Watt
Dimensions in mm: 220 x 86 x 160
Weight kg: 2.7
Including fuel pump/dosing pump and built-in water pump
Including extensive installation material.
A control element, timer or remote control must be ordered separately.
With an auxiliary heater from Ebersp?cher, you do not have to rely on the heat emitted by the running engine. Installed in the engine's cooling water system and connected to the fuel tank, the pre-heater transfers its heat to the vehicle's own heat exchanger. The warm air is then finely dosed into the vehicle interior via the vehicle's heating system. In addition, the auxiliary heater heats the engine via the cooling system and thus prevents harmful cold starts.
The advantages of an Ebersp?cher auxiliary heater are obvious: get in and feel good, enjoy perfect all-round visibility and arrive safely. And at the same time protect the environment and the car thanks to the pre-heated engine.
Accessory Ebersp?cher Pre-heater
